Skip to main content

Moving Coil Unidirectional Dynamic XLR Input Zinc Alloy Metal Handheld Microphone

Moving Coil Unidirectional Dynamic XLR Input Zinc Alloy Metal Handheld Microphone
Moving Coil Unidirectional Dynamic XLR Input Zinc Alloy Metal Handheld Microphone  Moving Coil Unidirectional Dynamic XLR Input Zinc Alloy Metal Handheld Microphone  Moving Coil Unidirectional Dynamic XLR Input Zinc Alloy Metal Handheld Microphone



Description:
Professional Moving Coil Dynamic Handheld Microphone
 
Item Specifics:
●Built-in Acoustic Filter
●Ultra-Wide Frequency Response
●High Signal Output for Vocals & Singing
●Rugged Construction & Steel Mesh Grill
●Integrated Low Noise Circuitry
●Includes: 15' ft. XLR to 1/4'' Audio Connection Cable
●Perfect for Stage Performances or In-Studio Use 
 
Technical Specs:
Color:Black
Mic Element/Type: Dynamic
Pickup/Polar Pattern: Uni-Directional
Coil Dynamic:unidirectional element
Mic Body Material: Zinc Alloy Metal
Frequency Response: 40Hz-16KHz
600 Ohm Output Impedance: (600Ω±30% (at 1kHz)
Microphone Sensitivity:  -52dB±3dB (0dB=1V/Pa at 1kHz)
Dimensions: L 10.3 x W 5 x H 3.3 inches (Φ1.24'' x 6.14'')
Weight: 1.43 lbs.
1cm=0.39Inches
 
Product Features:
Professional Moving Coil Dynamic Handheld Microphone
This unidirectional, dynamic handheld microphone is perfect for the serious musician recording in the studio or out on stage. It’s perfect for voice recording due to the high quality moving coil unidirectional dynamic element. Thanks to the durable zinc alloy metal construction and steel mesh ball shaped grill, you know your equipment is secure. Includes a 15 foot XLR cable.
 
Perfect for On-Stage or Studio Use
This microphone gives you a robust sound with high gain before feedback thanks to its moving-coil dynamic element. It’s also uni-directional so your microphone only picks up sounds that are directly in front it – that way your audio is reproduced without interference from instruments or speakers on stage.
 
XLR Input for Professional Quality Sound
The PDMIC78 features an XLR input, giving you the highest quality sound possible out of your vocal performances.
 
Built to Handle Just About Anything
With a durable zinc alloy metal construction and a steel mesh ball shaped grill, the PDMIC78 is built to last and can handle just about anything.
 
Package Included:
1 pcs Handheld Microphone
 
 Note:
 1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.
 2.The colors may have different as the difference display, please understand.


























Moving Coil Unidirectional Dynamic XLR Input Zinc Alloy Metal Handheld Microphone Buy Now


Popular posts from this blog

FMS FOX 800MM (31.5") Wingspan EPO RC Glider Airplane PNP

Buy FMS FOX 800MM (31.5") Wingspan EPO RC Glider Airplane PNP FMS FOX 800MM (31.5") Wingspan EPO RC Glider Airplane PNP Overview If you are looking for an easy to fly and affordable introduction to the exciting world of Radio Controlled flight then the 800mm FOX is the aircraft for you. Enjoy the thrill of R/C model flying with this Ready-To-Fly 800mm FOX. In a matter of minutes you can be ready to take off as all electronics are pre-installed at the factory and adjusted for ease of use. The 800mm FOX is the ideal choice for beginners. Pleasing on the eye, its gentle and forgiving flight characteristics are perfect for pilots to enjoy flying, while coming to terms with a completely new experience.  Description: Brand: FMS Model: FOX Item: RC Glider Wingspan: 31.5 in. (800mm) Length: 24.6 in (625mm) Weight: 145g Servo: 2*9g Wing Area: 8dm² Battery: 7.4V 350mAh Lipo TX: 4 Channel Material: Durable EPO FMS FOX RC Glider Manual, click here Package Included: 1x FMS FOX 800MM (31.5...

Eachine Tyro89 Spare Part 115mm Wheelbase 2.5 Inch Frame Kit w/ Canopy for Toothpick RC Drone

Get Eachine Tyro89 Spare Part 115mm Wheelbase 2.5 Inch Frame Kit w/ Canopy for Toothpick RC Drone Eachine Tyro89 Spare Part 115mm Wheelbase 2.5 Inch Frame Kit with Canopy for RC Drone Specification: Brand Name: Eachine Model: Tyro89 Item Name: 115mm Wheelbase 2.5 Inch Racing Frame Kit  Material: Carbon Fiber Wheelbae: 115mm Arm Plate Thickness: 3mm  Material: 3K Carbon Fiber Max. Prop Support: 2.5 Inch Motor Mount Hole: 9mm Application: Original Replace Frame Kit for Eachine Tyro89 FPV Racing Drone Package Included: 1x Bottom Plate 1x Canopy 1x Strap 1x bag of Screws Eachine Tyro89 Spare Part 115mm Wheelbase 2.5 Inch Frame Kit w/ Canopy for Toothpick RC Drone See detail

[yltresfbls] 600*103cm Giant Surf Lawn Summer Pool Water Play Slide Ladder For Children To Surf Outdoor Toys COD

Buy 600*103cm Giant Surf Lawn Summer Pool Water Play Slide Ladder For Children To Surf Outdoor Toys COD Description: Item Name: Water Play Slide Color: As pictures shown Material: PVC Optional Style: Style B; Style C Size: 600x103cm/236.22"x40.55" [Conversion: 1cm=0.3937 inch, 1inch=2.54 cm] Weight:1.49kg Features: 1. It is constructed from environmental friendly PVC material.  2. Bring endless happiness to your kids/toddlers/ babies in this hot summer. 3. BEST OUTDOOR WATER TOY – Children pets and dogs will be excited to play in the sprinkle and spray. Perfect for relaxation, party or celebration at lawn, garden, swimming pool or beach. 4. EASY TO USE – Just plug it to any garden hose or PVC tubing and then simply adjust water pressure to lower or higher the spray height. Suggest to unplug and drain the water for next time using conveniently. Note: 1. Please understand the product might have some colour difference due to different monitors and scenes. 2. Please allow slight...